Thumbnail 3

Robokart Robokart PrintrBoard REVD & LCD (Combo Pack)


  • Economically Priced.
  • Ease of installation.


Rs.5999
Qty :
-
+30
Shipping Charges : Rs. 90
Seller : Robokart   Other Sellers ?

Share :

The PrintrBoard electronics set was designed by members of Printrbot team in order to eliminate the production and/or functionality shortcomings of older RepRap electronics. PrintrBoard improves upon the previous production-grade electronics set (Gen6) by adding heatbed and SD card support, reverting to 1/16 microstepping Allegro stepper drivers, and improving connectivity reliability and reducing cost by elimination of the FTDI UART chip. PrintrBoard is by far the fastest and most reliable RepRap motherboard to date--and at an unbeatable price. Features : Atmel AT90USB1286 Microcontroller. Four integrated Allegro A4982 Stepper Drivers. Four 5V Endstop Connectors Supplied. OnBoard SD Card Slot. 2 N-MOSFETs for Extruder and HeatBed control. 1 N-MOSFET for low power Fan or motor. Revision D. Green Power LED. 4 layer, 2oz Cu PCB with ENIG Finish -- Excellent current handling & thermal dissipation. LUFA CDC Bootloader and Marlin RC2 firmware Pre-Installed. Offers additional 14 Pin Headers for Expansion and Developement. (Note: EXP1 and ICSP header pins on Printrboard are used to provide smart LCD support , LCD adapter is connected here. Dual Extruder board is connected at EXP2 on printrboard.) Softwares : Aurdino For Printrboard- For Working PrintrBoard Board Configuration Marlin Firmware - Lincomatic Marlin for PrintrBoard CDC BootLoader.zip - CDC BootLoader For PrintrBoard With Smart LCD Controller you can print without a PC. Kit Includes below items : PrintrBoard REV D with Install Kit 1) 3 Pieces of 3 Pin Molex with Mechanical switch Pre Soldered. 2) 2 Pieces of 2 Pin High Temperature Molex (for Thermistor). 3) 1 Piece of 2 Pin Molex (for Fan). 4) 2 Pieces of 4 Pin High Temperature Molex (for Heaters). 5) 1 Piece of Micro USB cable. 6) Resistor 7) Thermistor 8) 4 Pin ATX Connector LCD with Install kit : 1) LCD Controller 2) 12 Pin Flat Cable 3) Adapter for PrinterBoard 4) Knob 5) 4GB MicroSD Card The Panelolu2 is an advance of the original Panelolu. By using the I2C protocol it drives the LCD screen, a buzzer and three indication LEDs while using less pins than the original. This means free pins to drive additional fans or whatever else you like. Rotary switch allows to browse through all Menu options. It eliminates the need of computer to operate 3D printer, by allowing printing with SD card. Connect LCD to the "EXP2" slot on Printrboard.

  • Sales Package:
    1 pc x PrintrBoard REVD & LCD (Combo Pack)

view more +

Reviews

To wirte a review, Please Login

You may also like

Totudu Bearing

Rs. 15 Rs. 25

img
265
img
179

Totudu Timing Belt

Rs. 115 Rs. 125

img
155

Totudu Timing Pulley

Rs. 115 Rs. 125

img
130

Totudu Couplers

Rs. 115 Rs. 125

img
135

Totudu PTFE Tube

Rs. 145 Rs. 189

img
152
img
168
img
175
img
145
img
168

Totudu Heatbed

Rs. 500 Rs. 550

img
161
img
144

E3D E3D v6 Hotend

Rs. 825 Rs. 925

img
118

Totudu Lead Screw

Rs. 975 Rs. 1000

img
203

WOL3D ABS White 1.75mm

Rs. 1450 Rs. 2199

img
144

WOL3D White Pla 1.75mm

Rs. 1499 Rs. 1999

img
153

WOL3D Red Pla 1.75mm

Rs. 1499 Rs. 1999

img
162

WOL3D Black Pla 1.75mm

Rs. 1499 Rs. 1999

img
169

Robokart Robokart RAMPS 1.4

Rs. 1899 Rs. 2499

img
150

Wanhao Wanhao PLA White 1KG

Rs. 2100 Rs. 2500

img
160

Wanhao Wanhao PLA Black 1KG

Rs. 2100 Rs. 2500

img
177

Wanhao Wanhao PLA Red 1KG

Rs. 2100 Rs. 2500

img
149

Wanhao Wanhao PLA Blue 1KG

Rs. 2100 Rs. 2500

img
141

Wanhao Wanhao PLA Green 1KG

Rs. 2100 Rs. 2500

img
173

WOL3D Silk White Pla 1.75mm

Rs. 2299 Rs. 2999

img
150
img
179

WOL3D Red to Yellow 1.75mm

Rs. 2299 Rs. 2999

img
170

WOL3D Glow in the Dark 1.75mm

Rs. 2299 Rs. 2999

img
165

WOL3D Carbon Fiber 1.75mm

Rs. 2350 Rs. 2999

img
204

WOL3D Silk Gold Pla 1.75mm

Rs. 2499 Rs. 3199

img
213
img
148
img
186
img
194

Robokart Robokart Smoothie Board

Rs. 10999 Rs. 12000

img
233
img